Skip to main content
Version: ✨ 23.10

NCB configuration

How to configure​

Go to Configuration > NCB > Devices and press ADD

Add device​

General information tab

  • Host: select the network device being monitored
  • IP: the IP address of the device
  • Device Group: the device group for the device. Assigning/changing a device group will assign username and passwords for authentication on the device.

Model

  • Vendor: select the vendor of the device
  • OS Model: select the OS type of the device

Authentication

  • User Name: the username used to log in
  • Password: the password used for log in
  • Enable Command: select Yes if the device uses an enable mode
  • Enable Password: fill with the password if the device uses an enable mode

Press Save

image

Extended info tab

Additional information

  • Status: the rule can be Enabled, Disabled or Default
  • Comments: text field used for notes or comments

Add device group​

Go to Configuration > NCB > Devices group and press ADD

Device Group Device Group Name: short description for the group Authentication User Name: the username used for all devices associated to the Device Group Password: the username used for all devices associated to the Device Group Enable Command: activate if the device uses an enable mode Enable Password: enable password if the device uses an enable mode Devices (Removing or changing the devices associated to this Devicegroup will have impacts to the authentication information of the device) Devices: devices associated to the Device Group ACL Access groups: users with the specified Access Groups will have access to the Device Group

Extended info tab

Additional information

  • Status: the rule can be Enabled, Disabled or Default
  • Comments: text field used for notes or comments