Skip to main content
Version: 22.10

Graph template

Definition​

Graph models are models which can be used to shape graph layouts. Graph models can be used to configure multiple presentation settings including the y-axis measurement, the width and the height of the graph, or colors, etc.

Configuration​

Go to the Monitoring > Performances > Templates menu

image

  • The Template name field represents the name for the graph model
  • The Vertical label field contains the legend for the y-axis (type of data measured).
  • The Width and Height fields are expressed in pixels and express respectively the width and the height of the model.
  • The Lower limit field defines the minimum limit of the y-axis.
  • The Upper limit field defines the maximum limit of the y-axis.
  • The Base list defines the calculation base for the data during the scaling of the graph y-axis. Use 1024 for measurements like the Bytes (1 KB = 1 024 Bytes) and 1 000 for measurements like the volt (1 kV = 1 000 Volts).
  • The Scale Graph Values checkbox enable auto scale of the graph and bypass previous options
  • The Default i-Vertix Graph Template allows to display all chart without predefined template using these values
note

Regardless of the selected value, base 1024 will be used on following metric units :

  • B
  • bytes
  • bytespersecond
  • B/s
  • B/sec
  • o
  • octets
info

If the box Size to max is checked, the graph will automatically be scaled to the scale of the maximum value ordinates shown on the given period.

Using a graph template​

You can add this layout model on edition a service (or a template of service) by going into the Service Extended Info tab in configuration form:

image